Im trying to a lable a directory for ejabberd to store files that were uploaded with the http_upload module.Apparently I should set this to system_u:object_r:ejabberd_var_lib_t:s0since all the files in /var/lib/ejabberd are.So:ls -laZ /srv/data/unconfined_u:object_r:ejabberd_var_lib_t..
Author : hw
Im trying to pass an USB port (or hub) to a kvm/qemu guest, to no avail.To find out which physical port I can use, I plugged a device into the port, and dmesg on the host says:usb 3-3: new high-speed USB device number 10 using xhci_hcdWhich device..
I would like to assign an ipv6 address through the DHCPv6 server of pfsense.To configure a static address, I need to tell the DHCPv6 server a DUID.Apparently DUIDs belong to a particular machine and arent supposed to ever change unless you re-inst..
how can I keep audio active — or at least make it come back right away — after there was no audio for a few seconds?It takes some seconds for the audio to come back, like when a movie was paused and playback is being resumed.I either have to scr..
Im getting log file entries about ejabberd not being able to remove files that were uploaded by client through the file upload facility of XMPP.With the help of audit2allow, I have already created and installed some selinux modules to solve such issu..
is it required to run /usr/sbin/raid-check once per week?CentOS 7 does this.Maybe its sufficient to run it monthly?IIRC Debian did it monthly.I just checked on Fedora 32.It does not run raid-check at all, at least not via a cron entry./usr/sbin/raid-ch..
is there a way to rebuild an array using ssacli with a P410?A failed disk has been replaced and now the array is not rebuilding like it should: Array A (SATA, Unused Space: 1MB)logicaldrive 1 (14.55 TB, RAID 1+0, Ready for Rebuild)physicaldrive 1I:..
how can I make it so that audio continues to go the monitor connected to the display port when another monitor gets connected to the ..
Im looking for a good way to create a constant data stream that will occupy a bandwidth of about 2–5Mbit/sec between two remote hosts over the internet.I have full access to the hosts involved.My first attempt to use scp to copy data from /dev/n..
after trying SSHFS to mount a remote file system on a server with the result that SSHFS will sooner or later get stuck and require a reboot of the client, Im fed up with it and am looking for alternatives.So next I would like to use NFS over a VPN connect..
Recent Comments