CentOS 6, Iscsi,
Hi, folks,
I installed the iscsi packages, and I *thought* that the first thing to do was configure /etc/tgt/target.conf. Am I wrong? Did I have to configure iSNS on the RAID appliance?
All that I find on the web, incl. upstream docs, is to install it, then start the service.
What am I misunderstanding?
mark, aka “Confused”
3 thoughts on - CentOS 6, Iscsi,
Thu Jul 7 14:47:23 UTC 2016, m.roth at 5-cent.us wrote:
One thing to make sure you have straight is Target vs. Initiator [2], for me it originally felt like the names were backwards. I would expect the physical RAID machine to be the Target. Was that your expectation too, as it is a little unclear from the para above?
It might have helped if you had pointed at which upstream docs… some are better than others on the same subject.
When I did a test of it, I found starting with the Target creation doc [1] and following with the Initiator doc[3] (each on different RH/CentOS boxes) helped me to figure it out. BTW while in [1] they use /dev/vdb it works as well with real /dev/sd* or Logical Volumes, I don’t recall _trying_ with PVs.
[1] https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/ch-iscsi.html
[2] https://en.wikipedia.org/wiki/ISCSI#Initiator
[3] https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/iscsi-api.html
Even when this disclaimer is not here:
I am not a contracting officer. I do not have authority to make or modify the terms of any contract.
Hi, Todd,
Denniston, Todd A CIV NAVSURFWARCENDIV Crane wrote:
I was just googling on various sets of search terms… The one upstream was a RH documentation on setting up iSCSI for RHEL5/6.
Yeah, well, about that… my RAID is an appliance – it’s a JetStor, from AC&NC (yes, that’s an endorsement, I really like their hardware – it’s very reliable, and we’ve got some, hell, there’s two we need to replace.. that are Ultra320 SCSI for real, to give you an idea of the reliability, and their prices are very good). I’ve got docs for the JetStor, which include setting up the target – I’m still trying to figure the identifier name. Thanks very much for the links – I’ll be looking at them in a minute.
mark
Thu Jul 7 17:31:05 UTC 2016, m.roth at 5-cent.us wrote:
Although the identifier name format is shown in [1], it is better explained in [2] & [3].
[1] https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Storage_Administration_Guide/ch-iscsi.html
[2] http://www.intel.com/content/www/us/en/ethernet-products/converged-network-adapters/iscsi-quick-connect-red-hat-linux-guide.html
[3] https://en.wikipedia.org/wiki/ISCSI#Addressing
Even when this disclaimer is not here:
I am not a contracting officer. I do not have authority to make or modify the terms of any contract.