CentOS 6.4 – Doesnt Power Off With Shutdown/poweroff Cmd

Home » CentOS » CentOS 6.4 – Doesnt Power Off With Shutdown/poweroff Cmd
CentOS 4 Comments

Hello,

I’m looking for help figuring out why I am having problems with shutting down a machine.

I have tested the machine using Fedora 19 and Ubuntu 12 Live CD’s and both power down without issues.

I added acpi.debug_level=1 to the grub boot as it was suggested to see more info about ACPI in the logs

I found the following ACPI Errors in the /var/log/messages

Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN] Namespace lookup failure, AE_NOT_FOUND

Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND

Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io 0x0b00-0x0b07]
conflicts with ACPI region SOR1 [io 0xb00-0xb0f]

Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

I used the CentOS 6.4 Live CD last night with no hard drive in the system.

I photo’d the shutdown, here is the type up:

Sending all processes the TERM signal…

Sendng all processes the KILL signal…

Saving random seed:

Syncing hardware clock to system time

Turning off quotas:

umount2: Device or resource busy

umount: /dev/.initramfs/live: device is busy.

(In some cases useful info about processes that use

the device is found by lsof(8) or fuser(11))

init: Re-executing /sbin/init

Halting System…

r8169 0000:02:00.0: PME# enabled

ACPI: Preparing to enter system sleep state S5

ACPI Error (psargs-0359): [PPTS] Namespace lookup failure, AE_NOT_FOUND

ACPI Error (psparse-0537): Method parse/execution failed
[\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND

ACPI Error (psparse-0537): Method parse/execution failed [\PTS_] (Node ffff88019d043560), AE_NOT_FOUND

ACPI Error (psparse-0537): Method parse/execution failed [\_PTS] (Node ffff88019dbcf9e8), AE_NOT_FOUND

Disabling non-boot CPUS…

SMP alternatives: switching to UP code

Power Down.

acpi_power_off called

The system doesn’t power off, it just sits there. I have to hold the power button in for it to shut down.

The same still occurs with a completed a fresh minimum install of CentOS
6.4, installed the EPEL repo and did yum update.

I’m running the latest bios for the motherboard, and even tried going back one version.

MB: 785GM-E51 (MS-7596 1.2)

CPU: AMD Phenom II x4 945 3ghz

1TB HD, 6 Gig Mem

Any ideas?

(Besides using a baseball bat – I am considering it)

Here is some hardware info from the getinfo.sh script listed the forums.

== BEGIN uname -rmi =
2.6.32-358.18.1.el6.x86_64 x86_64 x86_64

== END uname -rmi =

== BEGIN rpm -qa \*-release\* =
CentOS-release-6-4.el6.CentOS.10.x86_64

epel-release-6-8.noarch

== END rpm -qa \*-release\* =

== BEGIN cat /etc/redhat-release =
CentOS release 6.4 (Final)

== END cat /etc/redhat-release =

== BEGIN getenforce =
Enforcing

== END getenforce =

== BEGIN rpm -qa kernel\* | sort =
kernel-2.6.32-358.18.1.el6.x86_64

kernel-2.6.32-358.el6.x86_64

kernel-firmware-2.6.32-358.18.1.el6.noarch

== END rpm -qa kernel\* | sort =

== BEGIN lspci -nn =
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host Bridge
[1022:9601]

00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602]

00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605]

00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]

00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]

00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0
USB OHCI1 Controller [1002:4398]

00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]

00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]

00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0
USB OHCI1 Controller [1002:4398]

00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]

00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller [1002:4385] (rev 3c)

00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]

00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00
Azalia (Intel HDA) [1002:4383]

00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]

00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge [1002:4384]

00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201]

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202]

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203]

00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204]

01:05.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4200] [1002:9710]

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)

== END lspci -nn =

4 thoughts on - CentOS 6.4 – Doesnt Power Off With Shutdown/poweroff Cmd

  • Update your BIOS if there is one. I’ve found that to often be the cause.

    —– Original Message —–
    | Same result, doesn’t turn off.
    |
    | Any other ideas?
    |
    | —–Original Message—–
    | From: CentOS-bounces@CentOS.org [mailto:CentOS-bounces@CentOS.org] |
    | > Hello,
    | >
    | >
    | >
    | > I’m looking for help figuring out why I am having problems with
    | > shutting down a machine.
    | >
    | >
    | >
    | > I have tested the machine using Fedora 19 and Ubuntu 12 Live CD’s
    | > and
    | > both power down without issues.
    | >
    | >
    | >
    | > I added acpi.debug_level=1 to the grub boot as it was suggested to
    | > see
    | > more info about ACPI in the logs
    | >
    | >
    | >
    | > I found the following ACPI Errors in the /var/log/messages
    | >
    | >
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN]
    | > Namespace lookup failure, AE_NOT_FOUND
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method
    | > parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND
    | >
    | >
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io
    | > 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available
    | > for
    | > this device, you should use it instead of the native driver
    | >
    | >
    | >
    | > I used the CentOS 6.4 Live CD last night with no hard drive in the
    | > system.
    | >
    | >
    | >
    | > I photo’d the shutdown, here is the type up:
    | >
    | >
    | >
    | > Sending all processes the TERM signal…
    | >
    | > Sendng all processes the KILL signal…
    | >
    | > Saving random seed:
    | >
    | > Syncing hardware clock to system time
    | >
    | > Turning off quotas:
    | >
    | > umount2: Device or resource busy
    | >
    | > umount: /dev/.initramfs/live: device is busy.
    | >
    | > (In some cases useful info about processes that use
    | >
    | > the device is found by lsof(8) or fuser(11))
    | >
    | > init: Re-executing /sbin/init
    | >
    | > Halting System…
    | >
    | > r8169 0000:02:00.0: PME# enabled
    | >
    | > ACPI: Preparing to enter system sleep state S5
    | >
    | > ACPI Error (psargs-0359): [PPTS] Namespace lookup failure,
    | > AE_NOT_FOUND
    | >
    | > ACPI Error (psparse-0537): Method parse/execution failed
    | > [\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND
    | >
    | > ACPI Error (psparse-0537): Method parse/execution failed [\PTS_]
    | > (Node
    | > ffff88019d043560), AE_NOT_FOUND
    | >
    | > ACPI Error (psparse-0537): Method parse/execution failed [\_PTS]
    | > (Node
    | > ffff88019dbcf9e8), AE_NOT_FOUND
    | >
    | > Disabling non-boot CPUS…
    | >
    | > SMP alternatives: switching to UP code
    | >
    | > Power Down.
    | >
    | > acpi_power_off called
    | >
    | >
    | >
    | > The system doesn’t power off, it just sits there. I have to hold
    | > the
    | > power button in for it to shut down.
    | >
    | >
    | >
    | > The same still occurs with a completed a fresh minimum install of
    | > CentOS 6.4, installed the EPEL repo and did yum update.
    | >
    | >
    | >
    | > I’m running the latest bios for the motherboard, and even tried
    | > going
    | > back one version.
    | >
    | >
    | >
    | > MB: 785GM-E51 (MS-7596 1.2)
    | >
    | > CPU: AMD Phenom II x4 945 3ghz
    | >
    | > 1TB HD, 6 Gig Mem
    | >
    | >
    | >
    | > Any ideas?
    | >
    | >
    | >
    | > (Besides using a baseball bat – I am considering it)
    | >
    | >
    | >
    | > Here is some hardware info from the getinfo.sh script listed the
    | > forums.
    | >
    | >
    | >
    | > == BEGIN uname -rmi ==
    | >
    | > 2.6.32-358.18.1.el6.x86_64 x86_64 x86_64
    | >
    | > == END uname -rmi ==
    | >
    | >
    | >
    | > == BEGIN rpm -qa \*-release\* ==
    | >
    | > CentOS-release-6-4.el6.CentOS.10.x86_64
    | >
    | > epel-release-6-8.noarch
    | >
    | > == END rpm -qa \*-release\* ==
    | >
    | >
    | >
    | > == BEGIN cat /etc/redhat-release ==
    | >
    | > CentOS release 6.4 (Final)
    | >
    | > == END cat /etc/redhat-release ==
    | >
    | >
    | >
    | > == BEGIN getenforce ==
    | >
    | > Enforcing
    | >
    | > == END getenforce ==
    | >
    | >
    | >
    | > == BEGIN rpm -qa kernel\* | sort ==
    | >
    | > kernel-2.6.32-358.18.1.el6.x86_64
    | >
    | > kernel-2.6.32-358.el6.x86_64
    | >
    | > kernel-firmware-2.6.32-358.18.1.el6.noarch
    | >
    | > == END rpm -qa kernel\* | sort ==
    | >
    | >
    | >
    | > == BEGIN lspci -nn ==
    | >
    | > 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host
    | > Bridge [1022:9601]
    | >
    | > 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880
    | > PCI to PCI bridge (int gfx) [1022:9602]
    | >
    | > 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880
    | > PCI to PCI bridge (PCIE port 1) [1022:9605]
    | >
    | > 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee
    | > ATI
    | > SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
    | >
    | > 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    | >
    | > 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0 USB OHCI1 Controller [1002:4398]
    | >
    | > 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    | >
    | > 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    | >
    | > 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0 USB OHCI1 Controller [1002:4398]
    | >
    | > 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    | >
    | > 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00
    | > SMBus
    | > Controller [1002:4385] (rev 3c)
    | >
    | > 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
    | >
    | > 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
    | > SBx00 Azalia (Intel HDA) [1002:4383]
    | >
    | > 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
    | >
    | > 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI
    | > SBx00
    | > PCI to PCI Bridge [1002:4384]
    | >
    | > 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
    | >
    | > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor HyperTransport Configuration [1022:1200]
    | >
    | > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor Address Map [1022:1201]
    | >
    | > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor DRAM Controller [1022:1202]
    | >
    | > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor Miscellaneous Control [1022:1203]
    | >
    | > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor Link Control [1022:1204]
    | >
    | > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices
    | > [AMD]
    | > nee ATI RS880 [Radeon HD 4200] [1002:9710]
    | >
    | > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
    | > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
    | > (rev
    | > 03)
    | >
    | > == END lspci -nn ==
    | >
    | >
    | >
    | >
    | >
    | >
    | >
    | >

  • I have the latest bios installed – DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7596/785GM-E51 (MS-7596), BIOS V2.12 02/18/2011

    However, I just used the ELRepo to install kernel-ml (Linux version 3.11.4-1.el6.elrepo.x86_64) and it shuts down fine,.. Of course, it has other errors – lol

    So I’m leaning toward it’s a kernel bug with these kernel-2.6.32-358.18.1.el6.x86_64 and kernel-2.6.32-358.el6.x86_64 (the two installed by default)

    Now I’m going to try to locate the kernel version list so I can see if I can get a smaller jump in version up to test with.

    kernel-ml-3.11.4-1.el6.elrepo.x86_64 worked as expected on the shutdown, but has some other issues.

    —–Original Message—–
    From: CentOS-bounces@CentOS.org [mailto:CentOS-bounces@CentOS.org] |
    | > Hello,
    | >
    | >
    | >
    | > I’m looking for help figuring out why I am having problems with
    | > shutting down a machine.
    | >
    | >
    | >
    | > I have tested the machine using Fedora 19 and Ubuntu 12 Live CD’s
    | > and both power down without issues.
    | >
    | >
    | >
    | > I added acpi.debug_level=1 to the grub boot as it was suggested to
    | > see more info about ACPI in the logs
    | >
    | >
    | >
    | > I found the following ACPI Errors in the /var/log/messages
    | >
    | >
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI Error (psargs-0359): [ECEN]
    | > Namespace lookup failure, AE_NOT_FOUND
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI Error (psparse-0537): Method
    | > parse/execution failed [\] (Node ffffffff81fdbeb0), AE_NOT_FOUND
    | >
    | >
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI: resource piix4_smbus [io
    | > 0x0b00-0x0b07] conflicts with ACPI region SOR1 [io 0xb00-0xb0f]
    | >
    | > Oct 11 11:51:36 plum kernel: ACPI: If an ACPI driver is available
    | > for this device, you should use it instead of the native driver
    | >
    | >
    | >
    | > I used the CentOS 6.4 Live CD last night with no hard drive in the
    | > system.
    | >
    | >
    | >
    | > I photo’d the shutdown, here is the type up:
    | >
    | >
    | >
    | > Sending all processes the TERM signal…
    | >
    | > Sendng all processes the KILL signal…
    | >
    | > Saving random seed:
    | >
    | > Syncing hardware clock to system time
    | >
    | > Turning off quotas:
    | >
    | > umount2: Device or resource busy
    | >
    | > umount: /dev/.initramfs/live: device is busy.
    | >
    | > (In some cases useful info about processes that use
    | >
    | > the device is found by lsof(8) or fuser(11))
    | >
    | > init: Re-executing /sbin/init
    | >
    | > Halting System…
    | >
    | > r8169 0000:02:00.0: PME# enabled
    | >
    | > ACPI: Preparing to enter system sleep state S5
    | >
    | > ACPI Error (psargs-0359): [PPTS] Namespace lookup failure,
    | > AE_NOT_FOUND
    | >
    | > ACPI Error (psparse-0537): Method parse/execution failed
    | > [\_SB_.PCI0.SBRG.EPTS] (Node fff88019dbc8c68), AE_NOT_FOUND
    | >
    | > ACPI Error (psparse-0537): Method parse/execution failed [\PTS_]
    | > (Node ffff88019d043560), AE_NOT_FOUND
    | >
    | > ACPI Error (psparse-0537): Method parse/execution failed [\_PTS]
    | > (Node ffff88019dbcf9e8), AE_NOT_FOUND
    | >
    | > Disabling non-boot CPUS…
    | >
    | > SMP alternatives: switching to UP code
    | >
    | > Power Down.
    | >
    | > acpi_power_off called
    | >
    | >
    | >
    | > The system doesn’t power off, it just sits there. I have to hold the
    | > power button in for it to shut down.
    | >
    | >
    | >
    | > The same still occurs with a completed a fresh minimum install of
    | > CentOS 6.4, installed the EPEL repo and did yum update.
    | >
    | >
    | >
    | > I’m running the latest bios for the motherboard, and even tried
    | > going back one version.
    | >
    | >
    | >
    | > MB: 785GM-E51 (MS-7596 1.2)
    | >
    | > CPU: AMD Phenom II x4 945 3ghz
    | >
    | > 1TB HD, 6 Gig Mem
    | >
    | >
    | >
    | > Any ideas?
    | >
    | >
    | >
    | > (Besides using a baseball bat – I am considering it)
    | >
    | >
    | >
    | > Here is some hardware info from the getinfo.sh script listed the
    | > forums.
    | >
    | >
    | >
    | > == BEGIN uname -rmi ==
    | >
    | > 2.6.32-358.18.1.el6.x86_64 x86_64 x86_64
    | >
    | > == END uname -rmi ==
    | >
    | >
    | >
    | > == BEGIN rpm -qa \*-release\* ==
    | >
    | > CentOS-release-6-4.el6.CentOS.10.x86_64
    | >
    | > epel-release-6-8.noarch
    | >
    | > == END rpm -qa \*-release\* ==
    | >
    | >
    | >
    | > == BEGIN cat /etc/redhat-release ==
    | >
    | > CentOS release 6.4 (Final)
    | >
    | > == END cat /etc/redhat-release ==
    | >
    | >
    | >
    | > == BEGIN getenforce ==
    | >
    | > Enforcing
    | >
    | > == END getenforce ==
    | >
    | >
    | >
    | > == BEGIN rpm -qa kernel\* | sort ==
    | >
    | > kernel-2.6.32-358.18.1.el6.x86_64
    | >
    | > kernel-2.6.32-358.el6.x86_64
    | >
    | > kernel-firmware-2.6.32-358.18.1.el6.noarch
    | >
    | > == END rpm -qa kernel\* | sort ==
    | >
    | >
    | >
    | > == BEGIN lspci -nn ==
    | >
    | > 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS880 Host
    | > Bridge [1022:9601]
    | >
    | > 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880
    | > PCI to PCI bridge (int gfx) [1022:9602]
    | >
    | > 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880
    | > PCI to PCI bridge (PCIE port 1) [1022:9605]
    | >
    | > 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
    | >
    | > 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    | >
    | > 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0 USB OHCI1 Controller [1002:4398]
    | >
    | > 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    | >
    | > 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
    | >
    | > 00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0 USB OHCI1 Controller [1002:4398]
    | >
    | > 00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
    | >
    | > 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00
    | > SMBus Controller [1002:4385] (rev 3c)
    | >
    | > 00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c]
    | >
    | > 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI
    | > SBx00 Azalia (Intel HDA) [1002:4383]
    | >
    | > 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
    | >
    | > 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI
    | > SBx00
    | > PCI to PCI Bridge [1002:4384]
    | >
    | > 00:14.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI
    | > SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
    | >
    | > 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor HyperTransport Configuration [1022:1200]
    | >
    | > 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor Address Map [1022:1201]
    | >
    | > 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor DRAM Controller [1022:1202]
    | >
    | > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor Miscellaneous Control [1022:1203]
    | >
    | > 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h
    | > Processor Link Control [1022:1204]
    | >
    | > 01:05.0 VGA compatible controller [0300]: Advanced Micro Devices
    | > [AMD] nee ATI RS880 [Radeon HD 4200] [1002:9710]
    | >
    | > 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
    | > RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
    | > (rev
    | > 03)
    | >
    | > == END lspci -nn ==
    | >
    | >
    | >
    | >
    | >
    | >
    | >
    | >

LEAVE A COMMENT