Help With Driver Eth0

Home » CentOS » Help With Driver Eth0
CentOS 3 Comments

Dear Friends of the Community

Here by I request some help, now Install CentOS 5.0 in

DELL 3020 one machine installation took correctly, but after installation

I find that the network card that brings integrated computer does not recognize the eth0.

02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B
PCI Express Gigabit Ethernet controller (rev 02)
Subsystem: Giga-byte Technology Unknown device e000
Flags: bus master, fast devsel, latency 0, IRQ 50
I/O ports at b000 [size%6]
Memory at e1510000 (64-bit, prefetchable) [size=4K]
Memory at e1500000 (64-bit, prefetchable) [sizedK]
[virtual] Expansion ROM at e1520000 [disabled] [sizedK]
Capabilities: [40] Power Management version 3
Capabilities: [50] Message Signalled Interrupts: 64bit+ Queue=0/1
Enable+
Capabilities: [70] Express Endpoint IRQ 1
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=2
Capabilities: [d0] Vital Product Data
Capabilities: [100] Advanced Error Reporting
Capabilities: [140] Virtual Channel
Capabilities: [160] Device Serial Number xx-xx-xx-xx-xx-xx-xx-xx

I researched well into the problem in various forums, but the driver you need the equipment is Realtek RTL8111B / RTL8168B NIC. Someone may orient me well what I have to do to install the driver for usb Offline so ?? if you can clear regards

*Kevin Mauricio Benavides Castro*
*Integrador de Systemas*
*Cel: +505 84478854 *

*Skype: kevin.olpc.support*

3 thoughts on - Help With Driver Eth0

  • Kevin Mauricio Benavides Castro wrote:

    First issue: why are you installing CentOS 5, and not 6, or 7?
    Second: why on *earth* are you doing 5.0, rather than the current 5.11?

    That looks like it’s already got the correct driver.

    Sorry, “install the driver for USB”? Did you meant to install the driver from a flash drive, or install a USB driver? Please clarify.

    mark

  • why are you installing a completely unpatched release from 8 years ago? The updated/patched release of CentOS 5 is 5.11.

    also, EL 5 has a very short remaining life, its already off ‘full support’ as of Q1 2014, and in ‘maintenance updates only’, which will only last 2 more years (Q1 2017). Any new install now really should be CentOS 6 or 7.

    The RT8111 family of adapters are very common, I’d expect them to work with said updated release.

LEAVE A COMMENT