Network Storage
Hello,
I have looked into the various network attached storage devices and software based solutions.
Can’t really find one I like.
Would it be possible to add a couple HDs to my existing 6.8 server and set them up as RAID drives? If so, how would I keep it from mirroring the system drive?
Just spent$2500 on a transmission for my truck, so I broke right know and need to go the cheapest route.
TIA
4 thoughts on - Network Storage
assuming your server has room for more drives and sata or sas ports, sure. physically add the disks, use mdraid to put them in a mirror or raid5/6 or whatever, use vgcreate to define a new volumegroup from that raid, then use lvcreate to create logical volumes on that volume group, which you can put file systems on, and add those file systems to your
/etc/fstab, then mount them.
it would only do that if you explicitly told it to.
TE Dukes wrote:
Of course, and you need to read up on RAID a bit.
Try this trick, if you’ve got a big enough tower case: buy a couple of hot-swap drive bays from Microcenter, about $30 each. Then buy a couple of WD Reds – whatever TB you can afford. Install the hot swap bays, stick the drives in, and use Linux RAID to set them up, either as a mirror (RAID 1), or RAID 0, I think.
Then just partition it using parted, and have fstab mount it wherever you want.
mark
which
/etc/fstab,
Thanks!!
I think this will get me started, then I can buy an enclosure, a couple extra, etc., when I recover from the auto expense.
hot-swap in, I
That’s cool! Didn’t know they made something like that.
I only have one spare 5.25 and one spare 3.5. I think this TS130 has 2 –
5.25, 2 – 3.5 and 2 – 2.5.
I know they make a 5.25 to 3.5 adapter. Probably will just pick one of those up for now but that hot-swap bay will give me options when I can expand things a little.
Thanks!!