hi everyone I’ve just configured a simple raid10 on a Dell system, but one thing is puzzling to me. I’m seeing this below and I wonder why? There: Consist = No
…
/c0/v1 :
=====
————————————————————-
3 thoughts on - Raid 10 Not In Consistent State?
Active Operations = Background Initialization (0%)
Once this completes you would be able to run a CC
Cameron
well, I’m not so sure…
$ perccli /c0/v1 show init Controller = 0
Status = Success Description = None
VD Operation Status :
==================
———————————————————
This looks like an LSI controller, so you might ask them for help. Or if you have a support contract you can ask Dell.
3 thoughts on - Raid 10 Not In Consistent State?
Active Operations = Background Initialization (0%)
Once this completes you would be able to run a CC
Cameron
well, I’m not so sure…
$ perccli /c0/v1 show init Controller = 0
Status = Success Description = None
VD Operation Status :
==================
———————————————————
This looks like an LSI controller, so you might ask them for help. Or if you have a support contract you can ask Dell.
–keith