We have tens of networks(VLANs) in data center with a central Linux DHCP server. each network has their router to do the DHCP relay. So, the DHCP servers configuration files has tens subnet statements. Because PXE booting is standard in whole d..
all :-)on CentOS 6 I need keep the hostname from a dhcp server:cat /etc/sysconfig/network-scripts/ifcfg-eth0DEVICE=eth0HWADDR:50:56:27:0E:C8TYPE=Ethernet UUID 924b21-e92a-4944-a054-06d1967155c1ONBOOT=yes NM_CONTROLLED=yes BOOTPROTO=dhcp PEERDNS=yesw..
Ive a 7 box (actually, its RHEL, but the general list there is moribund), and Im trying to configure it correctly so that it gets its hostname from the DHCP server. All Ive found so far is a script to use from hooks of some kind. *Surely* theres j..
Check your DHCP servers setup – you should be getting your IP, netmask, gateway and DNS servers from the DHCP se..
,Im facing this routing problem, the setup is actualy part of ltsp, but I think this problem is CentOS-specific.The server is a Dell Poweredge R210. The install is standard 6.4, updated.I have one nic facing the public internet:vi /etc/sysconfig/network-scripts/ifcfg-em1DEVICE=em1BOOTPROTO=n..
AllI have looking for any specific answer for one thing.I have a virtualized Server with only one physical interface eth0 (WAN). To run OpenVPN i need to use DHCP server. And here is the question: is there a chance to run DHCP server on eth0:0 interfa..
My linux box, running with Centos-5.5, is showing up (??) a pseudo network interface for Eth0. On Switch where my Eth0 is connected, observed 2 MAC-Addresses. If a DHCP server present in LAN, the second pseudo interface is picking up a DHCP IP Addr..
If a machine with centos 6.2 is set for DHCP and it looses power and the switch looses power for a long time. lets say a day. so the switch really goes off even with batter backup.Now power comes on, the machine asks for a DHCP address before the swi..