folks, This is a test post; to make it of interest, heres an issue you might want to be aware of, those with not brand new hardware. Weve got a few Dell PE R415s. A 2TB b/u drive on one was getting full, so I went to replace it with a 3TB drive (a..
Not having much luck googling….Im working on our ks.cgi, and in the case that were using gpt, I know that kickstart cant, natively, use gpt yet. However, it is my impression that clearpart –initlabel –none –drives=$DISKwould wipe the GPT lab..
I have a system running CentOS 6.3, with a SCSI attached RAID: http://www.raidweb.com/index.php/2012-10-24-12-40-09/janus-ii-scsi/2012-10-24-12-40-59.html For disaster recovery purposes, I want to build up a spare system which could take the place..
I have a system x3100 m4 system with 64GB SSD for OS and 2x2tb for data as MD device (software RAID).It had Fedora 17 with EFI/I tried to install CentOS 6. deleting the existing partitions on the SSD /dev/sdc.sda and sdb are the 2x2tb md device moun..
What does it take to make a disk bootable on a system with UEFI and a GPT on the boot disk? I used a default disk layout in the initial install on a 600Gb drive (on a box that also contained a larger raid). and it used a GPT.ReaR wont work to back up/rest..
All,I have a Drobo, connected to a CentOS 6.4 box. The box sees it as /dev/sdg.I want to format it ext3 (as they dont support ext4) but when I try I get:# fdisk -u /dev/sdgWARNING: GPT (GUID Partition Table) detected on /dev/sdg! The util fdisk doe..
I have a 24TB RAID6 disk with a GPT partition table on it. I need to partition it into 2 partitions one of 16TB and 1 of 8TB to put ext4 filesystems on both. But I really need to do this remotely. ( if I can get to the site I could use gparted )Now fd..
We just got in a few server-class drives. Theyre Seagate Constellations, 3TB. I went to partition and format, and did a mklabel gpt in parted.Ooops. It claims Sector size (logical/physical): 512B/512B After data sheet that doesnt tell me, and a l..
Finally had a chance to try this out, and it works totally on my Fedora16 laptop. But not on the EL6.2 server….Mar 26 16:36:00 gpfsnode8 kernel: usb 1-1: new high speed USB device using ehci_hcd and address 8Mar 26 16:36:00 gpfsnode8 kernel: usb 1..