My workhorse server is a SuperMicro with their H8DM8-2 motherboard. For many years it ran CentOS 5.x and 6.x until the boot drive failed last year. I installed a 1TB SSD as /dev/sda and planned to install CentOS 7 on it, replacing CentOS 6.5 on the fai..
HiI have a supermicro server, motherboard is with C612 chipset and beside that with LSI3108 raid controller integrated. Two Intel SSD DC S3710 200GB. OS: CentOS 7.1 up to date.My problem is that the Intel SSD Data Center Tool (ISDCT) does not recogn..
all!Im wondering if anyone can advise me on how (or even if) I can trigger some of the install-time hardware discovery, specifically to rediscover the sound hardware on my motherboard.I moved a C6 installation to a new (and diffrent) motherboard seve..
I noticed that the Supermicro X9SCL has a USB type-a port right on the motherboard.http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfmHas anyone used a port like this to boot the core OS and used the physical drives for OpenVZ ..
all!Using C6 on an Asus M5A99X EVO R2.0 motherboard with AMD six core FX6300. That board uses Realtek ALC892 audio chipset.For the first time since I got that motherboard I tried plugging in headphones to the front panel speaker output. I was somew..
I had to replace the motherboard on one of my CentOS 4 systems and am now getting a kernel panic.When I try to boot up, I get this: Volume group VolGroup00 not found ERROR: /bin/lvm exited abnormally! (pid 448) mount: error 6 mounting ext3 mount: er..
I want to add a new video card that will drive multiple monitors. Current installation of CentOS 6.3 x86_64 is working well with the hdmi output of the motherboard.Once I install the new video card, how do I force 6.3 to discover and configure it?Se..
Seems like overnight every motherboard that worked with linux has DROPPED off the face of the earth.Every motherboard I looked at is using the realtek 8111 chipset and a northbridge that is not supported.Example: GIGABYTE GA-970A-DS3, does not work w..
I just installed CentOS 6.3 on a Tyan motherboard and the NIC stopped talking after about 2 days of operation. Its connected to a Cisco 2950 switch. /var/log/messages has this in it:nv_stop_tx: TransmitterStatus remained busyI simply did an ifdown e..
When my machine installs (CentOS 6.3) the two network cards are getting reversed. The PCI card is getting eth0 and the motherboard is getting eth1. I would like them in reverse order to keep things the same as they used to be.How can I easily tell th..