Tag : NVIDIA
Home » Posts tagged NVIDIA"
I installed the elrepo kmod-nvidia and also the nvidia-detect and modules(see below).I had X working with the 3.10 from CentOS– but video was freezing. SO Ithought I would try the elrepo kernel. I installed that and X does not come up?How do I re-m..
Trying to install the NVidia proprietary drivers Ive identified what my problem is, but in kernel-devel-3.10.0-514.26.2.el7.x86_64, there is..
all,After the update to 7.3 libreoffice (5.0.6.2-3.el7.x86_64) became unusable slow. For an excel file with 250 rows even a simple scroll takes a few seconds, during that time the Xorg server is 100% working and the GPU utilization is at about 77% (f..
Ive been working on this issue for quite a while.Back in January of 2015 I posted about how well external monitors worked with the out-of-the-box CentOS 7 ATI radeon drivers and my Dell M6500 with an ATI FirePro M7820.At the time the support was seaml..
Thiss my first ever post to CentOS lists. Sorry if I made any mistakes. My family is familiar with this RealPlayer Gold 11 and hesitate to use VLC or others. I googled a lot and tried different settings to no avail. Could you please tell me what I n..
Im currently installing CentOS 7 on a clients Dell Inspiron laptop. Heres the video card: # lspci | grep -i vga 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320] Most of the time, I either have to d..
all,I just wanted to give a heads up to any NVIDIA users that NVIDIA are dropping support for older hardware based on G8xxx, G9xxx and GT2xx chipsets in their latest display drivers. The last version to support these older chipsets will be the curr..
Bare metal CentOS 6.5, VNCserver running, client able to connect with perfect resolution. Nvidia GT240, driver 331.49.Upgrade to CentOS 7 with nouveau basic driver, all still works fine. Resolution poor on wire connected monitor, but perfect on VNC cli..
, Ive a problem with my system on CentOS 6.5 x86_64 on a workstation.During utilizzation, after several hours after boot (6/7 hours) I get an error:Disabling IRQ #16and after this seems be that 3d acceleration is unloaded.This is a workstation wit..
Recent Comments