My guess would be that the switch isnt configured to give you access to VLAN 5 with tagged packets.In that case, theres no need for you to configure eno1.5Specifically what are you trying to accomplish by configuring a tagged VLAN ..
I encountered a problem when creating a VLAN interface according to the Red_Hat_Enterprise_Linux-7-Networking_Guide.I configuered the parent interface ifcfg-eno1 as follows: DEVICE=eno1TYPE=EthernetBOOTPROTO=noneONBOOT=yes And I created a new file na..
Im configuring my KVM and in my network configuration I have 4 Network lancard2 nic = using teaming0 for management with access port configured in the switch side2 nic = using teaming1 for guest VM DATA ports. and in the switch is configured for L..
AllI have two bond interfaces namely, bond0 and bond1. bond0 has two ethernet interfaces associated with it and bond1 also has two ethernet interfaces associated with it.Now i create a bridge interface namely br20 (20 being the VLAN) and assign i..
All,I have a C6 (latest patches) physical machine that I use for network and server monitoring, predominantly over SNMP.It is on VLAN80.My network management interfaces on the switches are on VLAN50 with routing between the VLANs.I recently changed ..
all,I have a machine running CentOS 6.6 connected to a port on a Cisco Catalyst3750 series switch. That port is part of VLAN 48. I have VLAN 48 on the CentOS machine too.The IP network on VLAN 48 is 192.168.48.0/255.255.255.0. The address on the Cen..
all,I have a CentOS box that has a NIC (eth0) on which I defined 4 VLANs(counting the NIC itself): eth0, eth0.1, eth0.2 and eht0.3. Initially the Cisco switch was not partitioned into VLANs which means that the only VLANrunning on it was the defa..
at home I have setup a kvm virtualization lab. I have a layer 3switch, a host with 3 nics and CentOS 6.3.In the layer 3 switch I have setup a couple of vlans: vlan 1(default), 5 (quarantaine) and 10 (out-of-band-management).nic0 is configured in ..
Im facing a setup with only two NICs, and need for multiple trunked VLAN access, and bonded pairs, and KVM based bridges to get the VMs with exposed IP addresses. I can get basically any 2 out of the 3 server network components working, binding, VLA..