Archives : February-2019
Im doing a new install, and everything seems to have gone fine apart from the incredible amount of time its taken.It does have 6 x4TB drives in RAID6 and I am installing from a USB DVD drive as I had no SATA ports left, but this is getting rediculou..
HiI have read instructions for udev, I also found many example on how to do this. I want to lock in the SDA/SDB/SDC for my drives and I came up with a rule like thisKERNEL==sd?, SUBSYSTEM==block, ENV{ID_SERIAL}==ST500DM002-1BC142_W2A56H8A, NAME=s..
I just wanted to set up to send an encrypted message, so I went to generate a public/private key pair using gpg on C 6.Version 2.0.14, copyright 2009?Isnt there something newer than 10 years..
Folks ,The problems with HPlip goes on and on : I can not manage to establish aconnection on WiFi with the HP4620 : I can print to the printer but notscan . Running hp-check results in cups is not running, hplip is notproperly (HP) installed , xs..
Hallo,is there a way to use 2 different Nvidia Graphiccards in one system?The first one is working fine with 3 displays but I want to use 2 moredisplays with the second card. Do I need two card of the same series (4 or 7) or is there a way tomix differ..
Yeah, about that… Back in 12, we got a nice HP poster printer. They dont support Linux, but a co-worker got the .ppd out of the Mac support file.I tried it, then I looked at the file in vi… and found it *only*supported the 24 printer, *not* the..
Not sure whos package let an error slip in, but I dont believe Ive had this issue before: SELinux is preventing /usr/bin/motion from map access on the chr_file /dev/video1Yes, that should be allowed by de..
Hi.CentOS 7.6.1810, fresh install – use this as a base to create/upgrade new/old machines.I was trying to setup two disks as a RAID1 array, using these linesmdadm –create –verbose /dev/md0 –level=0 –raid-devices=2 /dev/sdb1 /dev/sdc1mdadm –cre..
, Im running CentOS 7.6 on an Corsair Force MP500 120 GB. Root fs is ext4 and this drive is ~1 year old. System works very well except on boot. During boot process I got always a file system check on nvme drive.Running smartctl on this drive I got this:..
I asked on stack overflow but Im trying to boost the signal.I dont normally program in python but I can usually figure out how to do it when I need to, but Im just stumped, there clearly is something Im not understanding.Its a CentOS 7.6 box and pyt..
Recent Comments