Archives : January-2018
More likely, crap hardware, which is awfully hard to avoid in USB-land. Just the other day, I traced a machine that failed to reboot to an external USB disk.Unplug it, machine boots right up.Move the same disk to a machine as different as can be ..
Hi! I am trying to use AssertPathExists in a systemd unit but it seems it not working. Does anyone have problems with this?i have this in unit :AssertPathExistsAssertPathExists=/etc/mlsensor/mlsensor.propertiesbut then when i start the service i ..
As you are no doubt aware, we are once again planning to hold a Dojo at the Marriott Grand Place on the Friday before FOSDEM starts – Friday, February 2, 2018.The schedule for the event may be found at https://wiki.CentOS.org/Events/Dojo/Brussels2..
Today we tried to update machines w/ Core2 Duo E6750 from3.10.0-693.11.1.el7.CentOS.plus to3.10.0-693.11.6.el7.CentOS.plus and the machines did not boot due to a kernel panic.Before we dig any further I wanted to know if the 11.6 kernel has been tes..
FolksIve been running lshw for years in both CentOS 6 and CentOS 7, yet just recently it started hanging.Neither a Control^C nor a kill of the process cured the hang; only a reboot.When I run it by hand from the command line, it displays stuff on ..
I have a user who couldnt get in via WinSCP to a server. Got him to log in via putty, and that was fine. But he still couldnt get in the other way. At my managers suggestion, I restarted autofs… and everything worked.Note that his home director5y ..
My laptop is a Dell XPS-13 running CentOS 7. It has a 13 1920×1080 screen and its a bit difficult for my mid-40s eyesight. Fedora and Debian, on this laptop, give me the option of choosing 1600×900 which is much easier for me to read but CentOS doe..
To: CentOS mailing list Thema: Re: [CentOS] Nvidia maximum pixel clock issue in kmod-nvidia-384.98 , Start BIOS Configuration and go to Graphic Configuration change On Board VGA to PCI Express x16 Automatic is VGA on Board Bis bald Alexander Am 09.01.2..
OS: CentOS 6.5.After I set multicast_router of bridge and its port to 2, like following:echo 2 > /sys/devices/virtual/net/eth81/bridge/multicast_routerecho 2 > /sys/devices/virtual/net/bond2/brport/multicast_router Then soft lockup occured:Message f..
free IPA everyone? I wanted to ask if you maybe seen below errors. Im trying regular: $ ipa-client-install –principal=admin –password=ccnR.Biotec13#diradm –enable-dns-updates and it fails: … Valid From: 2018-01-09 16:51:35 Valid Unt..
Recent Comments