I have managed to get through the qtmake stage of compiling the current github version of pgmodeler on CentOS 7 but make && make install fails with: make && make install cd libutils/ && ( test -e Makefile || /bin/qmake-qt5 -o Makefile /home/h/pgmodeler/libutils/libutils…
Author : Hakan
Home » Articles posted by Hakan (paged 4)
Short of backing up entire disks using dd, Id like to collect all required information to make sure I can restore partitions, disk information, UUIDs and anything else required in the event of losing a disk.So far I am collecting information from:- fd..
I have been having some problems with hardware RAID 1 on the motherboard that I am running CentOS 7 on. After a BIOS upgrade of the system, I lost the RAID 1 setup and was no longer able to boot the system.Testdisk revealed that the partition tab..
My computer running CentOS 7 is configured to use BIOS RAID0 and has two identical SSDs which are also encrypted. I had a crash the other day and due to a bug in the operating system update, I am unable to boot the system in RAID mode since dracut d..
My ThinkStation runs CentOS 7 which I installed on a BIOS RAID 0 setup with two identical 256 Gb SSDs after removing Windows. It runs fine but I just discovered in gparted something that does not seem right:- Launching gparted it complains invalid argum..
I tried moving a PosgreSQL database to an external harddisk due to lack of space on the main harddisks. Not the ideal solution of course but it should work. However, on CentOS 7 the external harddisk is mounted under /run/media and the user. I cop..
As you have seen in another message I have a failed system after an update from 7.5. I /think/ the issue might be with the ATI driver which seems to fail to load a framebuffer in Xorg.0.log.Is anyone successfully running a Radeon graphics card on 7..
I now have an older laptop with a display problem. I installed CentOS 7 on it in February and had to install the xorg-x11-drv-ati and evdev drivers because the docking station has an ATI Radeon card. Everything worked fine with a dual display set..
Just installed the above USB webcam but it is not recognized by dmesg | grep usb, nor does Zoom recognize it. I was under the understanding it should not require a driver, or?I am running CentOS..
I have an old external harddisk, Toshiba 320 Gb, with a USB connector that I wanted to check for contents. It did not start up when connected and I could not hear the motor spinning. After leaving it in the freezer overnight the motor spins but it..
Recent Comments