Updating Intel Graphics Driver On CentOS7
Hi all,
Is it possible to upgrade intel X11 org driver on CentOS7?? Maybe with elrepo’s packages:
http://elrepo.org/linux/extras/el7/x86_64/RPMS/xorg-x11-drv-intel-2.99.916-1.el7.elrepo.x86_64.rpm??
It seems it doesn’t exists driver in the upstream: https://01.org/linuxgraphics
Thanks,
5 thoughts on - Updating Intel Graphics Driver On CentOS7
Yes.
The upstream is actually at http://xorg.freedesktop.org
If you read the notes, and look at the stack that driver bundle is based upon, you will see it uses the same (latest) X11 driver as the elrepo package above:
https://01.org/linuxgraphics/downloads/2015q2-intel-graphics-stack-release
Hope that helps.
Well, that package is older as the one in the current CentOS 7 distro :
xorg-x11-drv-intel-2.99.916-1.el7.elrepo.x86_64.rpm vs xorg-x11-drv-intel-2.99.916-5.el7.x86_64
Are you searching for the 2.99.917 one ?
–
Thanks to both. Fabian, I am searching a driver that simply works :))
My laptop has a Hasweel motherboard with an Intel Graphics HD 4400:
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT
Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 3 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1
[AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
01:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM57786
Gigabit Ethernet PCIe (rev 01)
01:00.1 SD Host controller: Broadcom Corporation BCM57765/57785
SDXC/MMC Card Reader (rev 01)
02:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01)
and, my screen is “blurry” with the actual driver.
Hello,
In the past upgrading the kernel, not necesarily the driver has helped me (running C7 on Intel Baytrail NUC). Can you try kernel-ml from ElRepo and see if there’s improvement?
Lucian
Yes, looks like the distro caught up with the release of 7.1 :-)